Our TG series walking groups are designed in accordance with DIN 10070, DIN 10074 and FEM standards. In our products, S235JR material is used as sheet material. Our standard profile material quality is S235JR, S335G3. In our designs, we perform static analysis and torsion controls in our CosmosWorks program. In the design of our walking groups, we have increased the speed option by designing the wheels to drive from the hub (20-30-40 m / min). Our executive gearmotors; All gears work with oil bath in a closed cast iron box. There is no need to change gear oil again. All gears are manufactured as helical gear. Cementation and normalization heat treatment is applied in all gear groups. The gears and wheels used are subjected to grinding process and their efficiency is increased and silent operation is provided. Motors comply with IEC standard, squirrel cage, 400Vac nominal voltage, 3 phase, 50Hz, F insulation, S1 working class and minimum IP55 protection class, electromagnetic disc brakes. In our wheel designs, spherical graphite cast material, which is resistant to abrasion (GGG70), is used in the selection of materials by controlling the wheel pressures. In order to provide ease of installation of gearmotors, torque arm connection is preferred. Deep groove and spherical roller bearings, which can be exposed to axial and radial loads, are preferred on wheels. Our main goal is to provide quality products to our customers by using the facilities provided by us in our designs, ease of service, ease of service, ergonomic appearance, reduction of workmanship and technology.
For more detailed information about our products Click here.
Copyright 2020 Güralp Vinç ve Makine Konstrüksiyon San. Ve Tic. A.Ş all rights reserved.