Our TG type end carriages have been designed suitable for DIN 10070, DIN 10074 and Fem standards. The sheet material of such products are S235JR. Standard profile material is S235JR and S335G3 quality. Our designs are checked for statical analysis and buckling controls via CosmosWorks software. All the end carriage groups are designed as to drive the wheels directly and we have many speed options in standard (20-30-40 m/min). All the gears of motorized gearboxes are operating inside a closed volume with oil batch. There's no need for the replacement of the gearbox oil. All the gears are fabricated as helical type gear. All the gear groups are applied carburisation and normalization heat treatment processes. The gears and wheels are grinded and so that their efficiency increases whereas silent operation is provided. Motors are suitable for IEC standard, squierrel caged, having 400VAC nominal voltage, 3 phase, 50Hz, with F class isolation, S1 working class, minimum IP55 protection class and equipped with electromagnetic disc brakes. Regarding wheel designs, the wheel reactional forces are checked for the designs and diameter of the wheels are determined accordingly. As the material selection, GGG70 ductile cast iron which is abrasion resistant is used. In order to provide the easy mountability, moment armed type connection has been preferred. The wheel are equipped with deep groove ball bearings and spherical roller bearings that can be exerted axial and radial force shave been preferred. Our main goal about our designs is to provide high-quality products to our customers with mountability easiness, service easiness, ergonomical view using less workmanship and benefiting from the opportunities that the technology provides us.
Yedi Eylül Mahallesi Ümit Tunçağ Caddesi No:4 Torbalı / İzmir/TURKEY
T: 0.232.853 18 66 F: 0.232. 853 18 67
Copyright 2018 Güralp Vinç ve Makine Konstrüksiyon San. Ve Tic. A.Ş. all rights reserved by.